A Study on the Materials Used in Ancient Wooden Architectural Paintings at DaZhong Gate in Confucius Temple, Qufu, Shandong, China.

This study analyzes the pigments and binders used in the painted wooden structure of DaZhong Gate in the Confucius Temple in Qufu, Shandong Province, China. Five samples were collected from the building and analyzed using techniques such as polarized light microscopy (PLM), energy-dispersive X-ray spectroscopy (EDX), micro-Raman spectroscopy (m-RS), and Fourier-transform infrared spectroscopy (FT-IR). The findings reveal that the red, yellow, green, and blue pigments are identified as lead red, lead chromate yellow, emerald green, and ultramarine, respectively. The white pigment is determined to be a combination of chalk and lead white or anglesite. Considering the production period of the yellow and green pigments, it is inferred that architectural paintings underwent restoration or repainting during the late Qing Dynasty. The analysis of the binder in the pigment using pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) reveals that the binder employed is a protein-based glue. Additionally, the detected presence of Heat-bodied tung oil suggests a potential connection to traditional Chinese painting techniques on wooden surfaces. This discovery not only contributes to the historical research of the Confucius Temple but also provides crucial data for the conservation and restoration efforts of this culturally significant heritage site.

Study on the Properties of FEVE Modified with Ag2O/OH-MWCNTS Nanocomposites for Use as Adhesives for Wooden Heritage Objects.

The durability of wooden heritage objects and sites can be affected by external environmental factors, leading to decay, cracking, and other forms of deterioration, which might ultimately result in significant and irreversible loss. In this study, a FEVE resin was modified with Ag2O/OH-MWCNTS (MA), denoted as MAF, where three concentrations were prepared using in situ precipitation, and the resulting composite adhesive was characterized by a high viscosity and effective bacteriostatic properties, demonstrating a better viscosity and thermal stability, as well as antibacterial properties, than pure FEVE resin. The results show that MAF adhesives present good thermal stability, as evidenced by a lower mass loss rate following treatment at 800 °C compared to the pure FEVE resin. At a consistent shear rate, the viscosity of MAF demonstrates a notable increase with the proportion of MA, which is better than that of FEVE. This suggests that the nano-Ag2O particles in MA act as physical crosslinking agents in FEVE, improving the viscosity of the composite adhesive MAF. The adhesion strength between MAF and wood exhibits a similar trend, with wooden samples showing higher shear strengths as the proportion of MA increases in comparison to FEVE. Simultaneously, the antibacterial effects of the MAF adhesive exceeded 1 mm for Trichoderma, Aspergillus niger, and white rot fungi. The antibacterial activity of the MAF adhesive exhibited a direct correlation with the concentration of Ag2O/OH-MWCNTS, with the most pronounced inhibitory effect observed on Trichoderma. The MAF adhesive demonstrates promising prospects as an adhesive for wooden heritage artifacts, offering a novel approach for the rapid, environmentally friendly, and efficient development of composite adhesives with superior adhesive properties.

Research on Strengthening Fragile Paper with Polyvinylamine.

Paper documents are an important carrier of information related to human civilization, with the reinforcement and protection of fragile paper documents being a key aspect of their protection. This research utilized amphoteric polyvinylamine polymer as a paper reinforcement agent, strengthening the Xuan paper commonly used in paper documents. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction spectroscopy (XRD), X-ray photoelectron spectroscopy (XPS), solid-state 13C NMR, and other analytical methods were employed to compare the physical properties, micro-morphology, crystallinity, and aging resistance of the paper before and after reinforcement. Research was conducted on the effects of reinforcement, the aging resistance, and the effects on the fiber structure. The results indicate that polyethylenimine has a filling and bridging effect between the paper fibers. After treatment with polyethylenimine, there was a significant improvement in the folding endurance and tensile strength of the paper. Additionally, the paper maintains a good mechanical strength even after undergoing dry heat and humid aging.

A Study of Pigment, Adhesive, and Firing Temperature in Pottery Figurines Excavated from the Tomb of Qibi Ming, China.

Some painted pottery figurines were excavated from the tomb of Qibi Ming of the Tang Dynasty. A series of analytical techniques were employed to understand the craftsmanship of these painted pottery figurines. The pigment, cross-section, adhesive, and firing temperature were analyzed using microscopy (OM), energy X-ray fluorescence spectrometry (EDX), micro-Raman spectroscopy, pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS), and a dilatometer (DIL). The results demonstrated that the surface of the pigment layers had degraded to different degrees. The pigment particles were litharge, gypsum, malachite, cinnabar, hematite, minium, white lead, and carbon black. The cross-sectional images show that the painted layer of figurines 10-0966 and 10-0678 included a pigment layer and a preparation layer. The preparation layer of both pigments was lead white. Animal glue was used as an adhesive. The firing temperature of the pottery figurines was likely 1080 °C. This study can provide more accurate information with regard to the composition of the raw materials utilized in the making of these artifacts and support the selection of appropriate substances for the purposes of conservation and restoration of the painted pottery figurines.

A Study on the Materials Used in the Ancient Architectural Paintings from the Qing Dynasty Tibetan Buddhist Monastery of Puren, China.

Situated in the village of Lama Temple on the eastern bank of the Wulie River in Chengde, Puren Temple stands as one of the few remaining royal temples of great importance from the Kangxi era (1662-1722 AD). This ancient edifice has greatly contributed to the advancement of our comprehension regarding the art of royal temple painting. The present study undertakes a comprehensive analysis and identification of nine samples obtained from the beams and ceiling paintings within the main hall of Puren Temple. Furthermore, a systematic examination of their mineral pigments and adhesives is conducted. The findings from polarized light microscopy (PLM), energy-type X-ray fluorescence spectrometer (ED-XRF), micro-Raman spectroscopy (m-RS), and X-ray diffractometer (XRD) analyses reveal that the pigments present in the main hall beams of Puren Temple are cinnabar, lead white, lapis lazuli, and lime green, while the pigments in the ceiling paintings consist of cinnabar, staghorn, lead white, lapis lazuli, and lime green. The use of animal glue as a binder for these pigments on both the main hall beams and ceiling paintings is confirmed via pyrolysis-gas chromatography-mass spectrometry (Py-Gc/Ms) results. These findings hold significant implications for the future restoration of Puren Temple, as they provide valuable guidance for the selection of appropriate restoration materials.

The efficacy of sequential day 3 embryo and blastocyst transfer in patients with repeated implantation failure.

OBJECTIVE: To evaluate the efficacy of sequential transfer that one cleavage-stage embryo on day 3 and one blastocyst on day 5 are sequentially transferred in the same treatment cycle over conventional day 3 embryo transfer and blastocyst transfer in patients with repeated implantation failure (RIF). STUDY DESIGN: 2836 frozen embryo transfer (FET) cycles in patients with RIF were divided into three groups according to female age: <35, 35-39 and >39 years old groups, and four groups depending on the number and period of embryo transferred: two day 3 embryo, two blastocyst, single blastocyst and sequential transfer groups; Pregnancy outcomes including implantation rate (IR), clinical pregnancy rate (CPR), abortion rate (AR), ectopic pregnancy rate (EPR), multiple pregnancy rate (MPR), live birth rate (LBR) and neonatal characteristics from all the groups were assessed. RESULTS: Sequential transfer caused a significant increase in the IR, CPR and LBR over two day 3 embryo transfer and did not improve the IR, CPR and LBR over two blastocyst transfer in patients with RIF. Sequential transfer had higher CPR, MPR and LBR and lower IR than single blastocyst transfer. No significant differences were present in neonatal characteristics among the transfer protocol groups. Singleton group had a higher average gestational age and birthweight as well as a lower cesarean section rate, preterm labor rate and low birthweight rate than twin group. Additionally, the AR had no significant difference and the EPR of blastocyst transfer was low. CONCLUSIONS: Sequential transfer was not an effective method to improve IR in patients with RIF, and blastocyst transfer with higher IR was suggested. Single blastocyst transfer could serve as an effective transfer protocol to reduce MPR.

Catalytic oxidation effect of MnSO4 on As(III) by air in alkaline solution.

The catalytic oxidation effect of MnSO4 on As(III) by air in an alkaline solution was investigated. According to the X-ray diffraction (XRD), scanning electron microscope-energy dispersive spectrometer (SEM-EDS) and X-ray photoelectron spectroscopy (XPS) analysis results of the product, it was shown that the introduction of MnSO4 in the form of solution would generate Na0.55Mn2O4·1.5H2O with strong catalytic oxidation ability in the aerobic alkaline solution, whereas the catalytic effect of the other product MnOOH is not satisfactory. Under the optimal reaction conditions of temperature 90°C, As/Mn molar ratio 12.74:1, air flow rate 1.0 L/min, and stirring speed 300 r/min, As(III) can be completely oxidized after 2 hr reaction. The excellent catalytic oxidation ability of MnSO4 on As(III) was mainly attributed to the indirect oxidation of As(III) by the product Na0.55Mn2O4·1.5H2O. This study shows a convenient and efficient process for the oxidation of As(III) in alkali solutions, which has potential application value for the pre-oxidation of arsenic-containing solution or the detoxification of As(III).

Hydroxypropyltrimethyl Ammonium Chloride Chitosan Nanoparticles Coatings for Reinforcement and Concomitant Inhibition of Anionic Water-Sensitive Dyes Migration on Fragile Paper Documents.

The fragile paper is treated to improve the stability and appearance of the paper artifact, such as washing, lining, deacidification, and reinforcement. During the above treatments, paper documents inevitably make contact with water directly, leading to the appearance change, stability decrease, and migration or fading of anionic water-sensitive dyes, which are seriously harmful to information security. Herein, Hydroxypropyltrimethyl ammonium chloride chitosan (HACC) nanoparticles were employed for the reinforcement and concomitant inhibition of anionic water-sensitive dye migration on fragile paper. HACC nanoparticles were prepared through physical ball grinding method and characterized via LPSA, SEM, TEM, XRD and FTIR. To evaluate the protective potential of HACC nanoparticles coating, the chemical and mechanical properties of coated and uncoated papers were evaluated after dry heat and hygrothermal accelerated aging. Additionally, good color stability of anionic water-sensitive dyes was observed on the paper coated with HACC nanoparticles after lining technology. Finally, the interaction mechanism between the anionic water-sensitive dyes and HACC nanoparticles was analyzed using an ultraviolet spectrophotometer and FTIR. The as-proposed technique can provide technical support to improve the mechanical properties of fragile paper and enhance the anionic water-sensitive dyes stability in the aqueous phase.

The catalytic aerial oxidation of As(III) in alkaline solution by Mn-loaded diatomite.

The oxidization of As(III) to As(V) is necessary for both the detoxification of arsenic and the removal of arsenic by solidification. In order to achieve high efficiency and low cost As(III) oxidation, a novel process of catalytic aerial oxidation of As(III) is proposed, using air as oxidant and Mn-loaded diatomite as a catalyst. Through systematic characterization of the reaction products, the catalytic oxidation reaction law of Mn-loaded diatomite for As(III) was found out, and its reaction mechanism was revealed. Results show that Mn-loaded diatomite achieved a good catalytic effect for aerial oxidation of As(III) and maintained high performance over multiple cycles of reuse, which was directly related to the structure of diatomite and the behavior of manganese. Under the conditions of a catalyst concentration of 20 g/L, an air flow rate of 0.3 m3/h, a reaction temperature of 50 °C and an initial pH of 12.6, 96.04% As(III) oxidation was achieved after 3 h. Furthermore, the efficiency of As(III) oxidation did not change significantly after ten cycles of reuse. XPS analysis of the reaction products confirmed that the surface of the catalyst was rich in Mn(III), Mn(IV) and adsorbed oxygen(O-H), which was the fundamental reason for the excellent performance of Mn-loaded diatomite in the catalytic oxidation of As(III).

Microscopic Imaging Technology Assisted Dynamic Monitoring and Restoration of Micron-Level Cracks in the Painted Layer of Terracotta Warriors and Horses of the Western Han Dynasty.

Cracks are one of the most common issues affecting colored pottery relics; these can be divided into macroscopic cracks, recognizable by the human eye, and micron cracks, which cannot be observed by the naked eye. The gradual development of micron cracks eventually leads to large-scale cracks and the shedding of the coating layer. The repair of such micron cracks poses a key technical difficulty in restoring painted pottery remnants from the Western Han Dynasty. We attempt to solve this problem by reporting on a method that entails the use of a water-borne fluoropolymer material as the adhesive agent, as well as ultra-depth-of-field, digital microscopic imaging technology to build an operating platform for an optical imaging monitoring system. By making simulated ceramic samples, we systematically investigated the influences of water-borne fluoropolymer on chromaticity, adhesion, contact angle, surface morphology, and thermal stability of the paint layer. The results indicate that the color of the painted layer, when treated with the water-borne fluoropolymer, did not change, and the adhesion and contact angle of the painted layer were improved. Additionally, the outcomes of the SEM analysis show that the adhesion and hydrophobicity of the painted layer were improved because the water-borne fluoropolymer filled up the porous structure of the painted layer and covered the pigment particles. These findings demonstrate that aqueous, water-borne fluoropolymer can be used as an adhesive agent for micron cracks. Meanwhile, via the operating platform of the optical imaging monitoring system, the micron cracks of the painted terracotta warriors and horses from the Western Han Dynasty were successfully repaired using the water-borne fluoropolymer. The results imply that the microstructure, size, and geometric spaces of the cracks can be obtained directly utilizing microscopic imaging technology. The dynamic monitoring and imaging system described above can be employed to assist prosthetists in visualizing micro-repair operations in real time, assist with fine visual operations during the repair process, and realize dynamic video recording of the entire repair process. Our work provides a simple visualization method to repair micron-scale cracks in painted pottery relics by applying modern fluoropolymer and ultra-depth-of-field digital microscopic imaging technology.

An Essential Role of Polymeric Adhesives in the Reinforcement of Acidified Paper Relics.

Paper acidification causes paper relics to undergo embrittlement and decay, to form dregs, and even to break upon a single touch; therefore, reinforcement and deacidification treatments are essential steps for paper conservation and to retard the deterioration and prolong the life of objects. Polymeric adhesives play an essential role in reinforcement and deacidification treatments, although it is not well studied. In this work, the effect of polymeric adhesives on the conservation process and their protective effects on acidified paper relics were studied. Firstly, three polymeric adhesives, including wheat starch paste, polyvinyl butyral (PVB), and polyvinyl alcohol (PVA), were selected as research objects. Subsequently, their effects on four popular conservation methods were further discussed, including traditional mounting, hot-melt with silk net, alcohol-soluble cotton mesh, and water-soluble cotton mesh. Additionally, as an example, the reversibility and long-term durability of water-soluble adhesive PVA-217 were assessed. Using a computer measured and controlled folding endurance tester, pendulum tensile strength tester, tear tester, burst tester, FT-IR, video optical contact angle tester, and other instruments, the conservation application of water-soluble adhesives in paper relics was evaluated. This study provides a scientific basis and experimental data for the application of polymeric adhesives in the conservation of paper relics.

The Effects of Different Post-thawed Culture Periods on Clinical Outcomes in Frozen Embryo Transfer Cycle.

The purpose of this study is to evaluate the effects of different post-thawed culture periods on the clinical outcomes. 9381 frozen embryo transfer (FET) cycles were divided into three groups according to female age: < 35, 35-39, and > 39 years, and two groups depending on post-thawed culture period before transfer: short culture (2-3 h) group (S) and long culture (18-20 h) group (L). According to the increment number of post-thawed embryos, the L group divided into three groups: ≤ 2, one ≤ 2 and the other > 2, and > 2 groups. Pregnancy outcomes included the implantation rate (IR), clinical pregnancy rate (CPR), multiple pregnancy rate (MPR), live birth rate (LBR), and neonatal characteristics. Long post-thawed culture caused a significant increase in the IR, CPR, MPR, and LBR (p = 0.000, 0.004, 0.037, and 0.001; CI = 1.06-1.194, 1.042-1.237, 1.008-1.254, and 1.054-1.245, respectively), and blastomere increment number also had a significant effect on IR, CPR, MPR, and LBR (p = 0.000, 0.000, 0.000, and 0.000, respectively). No significant differences were present in neonatal characteristics between the two post-thawed culture groups. Singleton group had a higher average gestational age and birthweight as well as a lower cesarean section rate, preterm labor rate, and low birthweight rate than twins group. Long post-thawed culture was associated with higher IR, CPR, MPR, and LBR, and transferring a well-developed embryo after long post-thawed culture might be a viable embryo transfer strategy to decrease MPR while maintaining CPR and LBR.

An Essential Role of Gelatin in the Formation Process of Curling in Long Historical Photos.

Curling disease in long historical photos significantly affects the presentation of cultural heritage information. However, people lack attention to the formation process and microstructural changes of photo curling. In this article, a long historical photo (1912-1949 AD) collected by the Second Historical Archives of China was taken as the research object, and the formation process and cause of the curling were further explored. Firstly, Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray energy disperse spectrometer (EDS), and other instruments were used to analyze the material composition of the long historical photo. It was found that the photographic paper was made of gelatin, barium sulfate, and plant fiber layers. Then, the effects of hygrothermal environments on curling and contraction in the gelatin layer and simulated photographic paper were explored. Meanwhile, the formation process and main influence factors of the curling were preliminarily revealed. The morphological analysis by SEM was carried out to identify the inner correlation between the microstructure and curling of photos. Finally, the possible formation cause of photo curling was analyzed. This study provides a scientific basis and experimental data for the preservation and restoration of long historical photos based on gelatin.

Successful birth after ICSI with testicular immotile spermatozoa from a patient with total MMAF in the ejaculates: a case report.

There has been no report on the outcome of vitrified blastocyst transfer from a vitrified oocyte injected with immotile testicular spermatozoa with only multiple morphological abnormalities of the sperm flagella (MMAF). A couple diagnosed with MMAF returned to the clinic to attempt pregnancy using their vitrified oocytes. Testicular spermatozoa were injected intracytoplasmically, and the following intracytoplasmic sperm injection results were observed. In the second cycle, surplus vitrified oocytes and testicular retrieved sperm were used, but no pregnancy ensued. In the third cycle, a surplus vitrified blastocyst was transferred, and a healthy female child was delivered, with a birth weight of 3050 g and a birth length of 53 cm. In this report we describe a successful pregnancy achieved in a patient presenting MMAF. The successful pregnancy was obtained from vitrified oocytes microinjected with testicular retrieved sperm in a vitrified blastocyst transfer.

Blurring of ancient wall paintings caused by binder decay in the pigment layer.

In this paper, the effect of binder decay rather than a change in the pigments on the blurring of ancient wall paintings was researched. The simulated wall paintings were prepared by brushing an aqueous solution containing gelatine and ochre grains on the surface of cylindrical compressed soil samples. Then, the dried samples were calcined at 650 °C for 2 h to obtain the simulated wall paintings with the degraded binder gelatine. Next, the calcined samples were brushed with a certain amount of acetone solution containing an ionic liquid ([BMIm]PF6) to obtain the corresponding repaired samples. Based on the results from various characterization methods (UV-vis, FTIR, XRD, XPS, SEM, TG), the following conclusions were drawn. The degradation of the binder caused by calcination increases the surface roughness of the painting layer, resulting in enhanced scattering. In this case, because scattering decrease the light absorption by the pigments, even if unchanged pigment exists in the painting layer, its colour can become blurred. The filling of the ionic liquid into the pores caused by gelatine decay in the painting layer can decrease the scattering, and the blurred colour can be restored to some extent. As typical examples, this principle was successfully applied to restore the blurred colour of an ancient Chinese wall painting (Tang Dynasty) and a pottery (Eastern Han Dynasty).

Facile and Scalable Conservation of Chinese Ancient Paintings Using Water-Borne Fluoropolymer.

In China, alum-gelatin aqueous solution is historically used to prevent falling off of mineral pigments from paintings and to enhance strength of their paper matrices in the restoration process. However, after a long period of time of preservation, alum-gelatin aqueous solution applied to paintings will hydrolyze and produce free acid, which accelerates aging. To resolve this issue, instead of using alum-gelatin aqueous solution, here we report a new method of using a water-borne fluoropolymer coating to protect paintings. This coating is applied to simulated paintings, and their influences are systematically examined on the antipeeling property of pigment, mechanical properties, thermal stability, chromaticity, surface morphology, and water contact angle. Our results show that the applied coating slightly affects the appearance of the painting without falling off of pigment observed. Moreover, the coating increases the tensile strength and folding endurance of the paper because the polymer fills into the porous structure of paper fibers and covers pigment particles from SEM analysis. The treated painting retains moderate hydrophilicity, which facilitates removal of degradation substances from the paintings by water cleaning and the subsequent mounting procedure. Moreover, this coating is successfully applied to repairing a set of real ancient Chinese paintings of Yuan Dynasty (1271∼1368 A.D.), with practical acceptance. Our work provides a facile yet effective solution to conservation of ancient paintings by applying the modern fluoropolymers.

Development of Recyclable Iron Sulfide/Selenide Microparticles with High Performance for Elemental Mercury Capture from Smelting Flue Gas over a Wide Temperature Range.

Fast and effective removal of elemental mercury in a wide temperature range is critical for the smelting industry. In this work, a recyclable magnetic iron sulfide/selenide sorbent is developed to capture and recover Hg0 from smelting flue gas. Benefiting from Se doping, the Hg0 capture performance of prepared FeSxSey is significantly enhanced compared with traditional iron sulfide, especially at high temperatures. Considering the recyclability and working temperature, FeS1.32Se0.11 exhibits the best Hg0 capture performance. The average capture rate of FeS1.32Se0.11 is 3.661 µg/g/min at 80 °C and its saturation adsorption capacity is 20.216 mg/g. The flue gas compositions have almost no effect on Hg0 capture. X-ray photoelectron spectroscopy and mercury thermal programmed desorption suggest that the stable active Se-Sn2- adsorption site can combine with Hg0 to form HgSe, consequently improving Hg0 capture performance at high temperatures. After Hg0 capture, the spent FeSxSey can be collected by magnetic separation and regenerated through selective extraction, which facilitates harmless treatment and resource reuse of mercury. With the advantages of excellent Hg0 capture performance, wide operating temperature range, and remarkable recycling property, FeSxSey microparticles may be a promising sorbent for Hg0 capture in industrial applications, while opening a new avenue to realize the resource utilization toward toxic elements.

Evaluation and improvement of the novel method for vitrification of a few human sperms.

RESEARCH QUESTION: The purposes of this study are to evaluate the performance of the novel SpermVD device on vitrification of a few human sperms, and determine whether PICSI dish and density gradient centrifugation can improve the quality of sperm after thawing. DESIGN AND METHODS: In order to determine the suitable preparation methods, both washed sperm and neat sperm were selected in ICSI dish and PICSI dish, and frozen with the novel SpermVD device. The selected sperms were transferred to freezing droplets with 1 µl droplet of a 50/50 v/v mixture of QA Sperm Freezing Medium and QA Medium w/Hepes on the SpermVD wells. And the device was exposed to vapor of liquid nitrogen for 5 min and then placed into LN2 immediately. The sperms were thawed in a 37℃ oil filled dish which contained QA Medium w/Hepes droplets and they were searched and revaluated immediately. The frozen effects of sperm were evaluated by progressive motility, motility, viability and recovery rates of freezing-thawing sperm. RESULTS: After freezing-thawing, the overall sperm recovery rate was 94.2% with 70% viability, 20.7% progressive motility, and 36.2% motility. The progressive motility, motility, viability and recovery rates of washed sperm were lower than that of the neat sperm, with a significant difference (P <  0.01) at both viability and motility rates. In addition, the viability rate was significantly higher in PICSI dish group than that of ICSI dish group (P <  0.01) and the motility, recovery and progressive motility rates were not significantly different between the two groups (P > 0.05). CONCLUSIONS: The spermVD device was one of the effective platforms for freezing a few human sperms and using PICSI dish to select mature neat sperms could improve the quality of sperm after thawing. Density gradient centrifugation might be not required or suitable sperm preparation methods before freezing.

Carnosic acid alleviates brain injury through NF­κB­regulated inflammation and Caspase­3­associated apoptosis in high fat­induced mouse models.

High fat diet (HFD) is a risk factor for various diseases in humans and animals. Metabolic disease­induced brain injury is becoming an increasingly popular research topic. Carnosic acid (CA) is a phenolic diterpene synthesized by plants belonging to the Lamiaceae family, which exhibits multiple biological activities. In the present study, a mouse model of HFD­induced metabolic syndrome was generated. The body weight, liver weight, daily food intake, daily caloric intake, serum TG, serum TC, serum insulin and serum glucose of animals treated with CA were recorded. Additionally, the gene and protein expression levels of inflammatory cytokines, NF­κB signaling componnts, and caspase­3 were evaluated in the various CA treatment groups via immunohistochemical analysis, western blotting, reverse transcription­quantitative PCR. CA treatment significantly decreased HFD­induced metabolic syndrome by decreasing the serum levels of triglycerides, total cholesterol, insulin and glucose. Furthermore, CA served a protective role against brain injury by inhibiting the inflammatory response. CA significantly decreased the protein expression levels of various pro­inflammatory cytokines in serum and brain tissues, including interleukin (IL)­1ß, IL­6 and tumor necrosis factor­α, regulated by the NF­κB signaling pathway. In addition, CA was revealed to promote the expression levels of anti­apoptotic Bcl­2, and to decrease the expression levels of pro­apoptotic Bax and matrix metallopeptidase 9. The present results suggested that CA was able to alleviate brain injury by modulating the inflammatory response and the apoptotic pathway. Administration of CA may represent a novel therapeutic strategy to treat metabolic disease­induced brain injury in the future.

Comparative studies of hemolymph physiology response and HIF-1 expression in different strains of Litopenaeus vannamei under acute hypoxia.

Litopenaeus vannamei has a high commercial value and is the primary cultured shellfish species globally. In this study, we have compared the hemolymph physiological responses between two L. vannamei strains under acute hypoxia. The results showed that hemocyanin concentration (HC) of strain A6410 was significantly higher than strain Zhengda; Total hemocyte counts (THC) decreased significantly in both strains under hypoxic stress (p < 0.05). We also investigated the temporal and spatial variations of hypoxia inducible factors 1 (HIF-1) by qRT-PCR. The results showed that hypoxia for 12 h increased the expression levels of HIF-1α in tissues of muscle and gill from the two strains (p < 0.05). In the hepatopancreas, the expression levels of HIF-1 increased significantly in strain Zhengda and decreased significantly in strain A6410 (p < 0.05). No significant changes of HIF-1 expression were detected in the same tissues between the two strains under hypoxia for 6 h (p > 0.05), but in the gills and hepatopancreas under hypoxia for 12 h (p < 0.05). Additionally, the expression level of HIF-1 was higher in the strain Zhengda than A6410 in the same tissue under hypoxia for 12 h. It was indicated that the hypoxic tolerance of Litopenaeus vannamei was closely correlated with the expression level of HIF-1, and the higher expression level of HIF-1 to hypoxia, the lower tolerance to hypoxia in the early stage of hypoxia. These results can help to better understand the molecular mechanisms of hypoxic tolerance and speed up the selective breeding process of hypoxia tolerance in L. vannamei.